Non-sparking tools can also be termed as non-magnetic tools

Non- sparking tool can be regarded by various terms like “spark reduced,” “spark-resistant” or “spark-proof.” These are the names given to the tools which are made up of metals like brass, bronze, copper-nickel alloy, copper- aluminum alloys or beryllium bronze. Also, you can make use of non-metals like wood, leather, and plastics for creating a non-sparking tool. This type of hand tool is used commonly, so it is manufactured of steel alloys. These tools are not made of iron, and they do not contain elements of iron that is why they are known as non-sparking tools.

While working in an area with flammable gases and dust, you can use these quality non-sparking tools. For example- a hammer is a tool which can be regarded as a non-sparking tool. These tools usually are softer than those tools made up of high strength alloy steel. Selection of the appropriate tool is necessary for the task. The tool should be used specifically for the work it has been designed.

The important thing to know about non-sparking tools

Non-sparking tools sometimes generate sparks and can be referred to as “cold sparks.” Cold sparks have a low heat level. Use of non-sparking tool reduces the possibility of sparks. As you read above these non-sparking tools, generate spark sometimes, so “reduced spark tools” better fits in instead of non-sparking tools. Non-sparking tools manufacturers India have seen a surge in their demand since the increase in the manufacturing sector. These hand tools from ancient to modern era are found almost at every house which accomplishes the daily needs of people.

How to maintain non-sparking tools

  • All non-sparking tools should be kept clean and free from ferrous contaminants.
  • Always select a right-sized tool for which the tool has been designed
  • Non-sparking tools will need to be redressed more often. Keep your eyes away while using the tool.
  • Mechanical and ventilation systems are often proved good to remove hazardous materials, dust, and vapors from the workplace.

One should always ignore a job to be done in any hazardous type environment, as it can cause your life harm. Proper tools should be used to eliminate the ignition like electric motors. As you read above in the article, that even a non-sparking tool is not fully safe because it can sometimes spark. As everything has its pros and cons associated with it, the same is the case with the hand tools as well. Every tool here has quality but at the same time limitations also which one must not ignore and pay due to attention to the same. Be away from the area where you can smell the explosive atmosphere because working in the safe area is everyone’s necessity in every country. Striking tools, tightening tools, cutting tools, utility tools are non-magnetic tools which provide you best possible quality and safety assurance. Hence from the operator’s point of view, these tools must be of the best quality, and one must not ignore the trouble areas of the same.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *